Table of Contents
Advertisement
Available languages
Available languages
MUTE key
When you press the MUTE key
call, the microphone is switched off and the
other party cannot hear you. The
will appear on the display while MUTE is
activated.
To
conversation, press the MUTE key
again. While MUTE is enabled, the other
party will hear music on hold (MOH). If
necessary, MOH can be disabled. When
MOH is disabled, you will be able hear the
other party whereas the other party will not
be able to hear you.
Enabling MOH
Press the MENU key
Use the DIAL/SELECT key to select
the CONFIGURATION option
Use the ARROW keys to select the Y
options
Use the DIAL/SELECT key to select
the MUSIC ON MUTE option
Use the ARROW keys to select the
desired option (Y-MOH enabled, N-
MOH disabled)
Press the MENU key
PAUSE key
This key can be used when the telephone
is connected to a PBX system. It inserts an
interdigit pause (the default pause is 2
seconds – to change this setting see Other
configurations on page 10), starting with
the first digit when you press the PAUSE
key
. These pauses are essential for
some systems with extension lines and can
be stored in memories, in the Originating
Calls list or on the REDIAL key
display shows the character P above the
number dialed to indicate the pause.
during a
symbol
resume
a
normal
FLASH key
The FLASH key
number of special features (follow-me, call
waiting, conference, etc.) provided your
telephone is connected to a digital Central
Office or to a PBX system.
The default flash is 250 ms. It may be
necessary to program a different flash time
(see Other configurations on page 10). If
you are not sure about the correct flash
time, refer to the documentation of your
PBX to check what the recommended time
is.
Memories
The telephone has 12 memories. Numbers
can be stored on the following keys:
,
and
can store up to 16 digits.
With the handset on-hook, the stored
numbers can be displayed by pressing the
MEM key
The display will show the number of the
respective register, as shown in the figure
below:
Storing phone number in the memories
: Enter the phone number to be stored
Press the MEM key
Press the desired memory number
:
(
. The
The message "STORED" will appear
on the display
12
(special features)
allows you to use a
. Each of these memories
, followed by the memory key.
to
,
and
)
to
Advertisement
Table of Contents
