Checking Cables; Updating Driving Program - Invacare Leo Service Manual

Hide thumbs Also See for Leo:
Table of Contents

Advertisement

4.
Remove plugs from rear mirror fixing (1) or rear
mirror, depending on fittings.
5.
Remove screws (1) below operating console.
6.
Pull operating console upwards out of front fixing (1).
7.
Remove drive lever (1).
8. Remove screws C on drive lever (1) and remove drive
lever.
9. Disconnect potentiometer plug (3) from operating
console.
1509707-E
10.
Remove screws A on potentiometer.
11. Replace potentiometer.
12. Reconnect potentiometer plug (3) with operating
console.
13.
Connect potentiometer A and drive lever mounting B:
Tighten screw C.
14. Install parts in reverse order.
15. Test all functions.

4.4.5 Checking cables

1. Switch controls OFF on the operating control.
2. Check all cables for visible damage, crushing points
or abrasion points.
3. Replace damaged cables.
4. Pull on each plug carefully. The plug must not come
out of its socket when pulled on lightly.
5. If a plug is loose, apply slight pressure to push the plug
into the socket. The plug must snap in place securely.
6. Check that the plug is firmly attached to its socket.
7. Remove batteries, as described in chapter 6.3.
8. Check battery cables for visible damage, crushing
points or abrasion points.
9. Replace damaged cables.
10. Assemble all parts again in reverse order.
11. Test all functions of the mobility device.

4.4.6 Updating driving program

The driving programs for electric wheelchairs are
continually updated and improved by Invacare®. For this
reason, you should check whether the version number
is still up to date each time a wheelchair comes in for
repairs, and also during regular inspections.
If a newer version is available, the driving program must be
updated. The procedure for updating the driving program
is described in the user manual of the Wizard software.
The electronic system is supplied with a standard
drive program. If the driving program has been
customised, you have to perform this customisation
again, after installing the new driving program.
Service
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents