Activating Walky-Talky Mode; Deactivating Walky-Talky Mode; Using A Handset In Walky-Talky Mode As A Room Monitor; Handset Settings - Siemens GigasetS44 Owner's Manual

Handset settings

Activating Walky-Talky mode

¢ ¢
v í
Walky-Talky
If, when you are in Walky-Talky mode,
you press the talk key c or handsfree
key d, the call will go to all the hand-
sets that are in Walky-Talky mode. The
connection is made with the first handset
to answer the Walky-Talky call.
u
The loudspeaker volume and advisory
tones are set in exactly the same way as
if your handsets were in range of the
base station (page 21).
u
"Activate/deactivate ringtone"
(page 21) and "Activate/deactivate key-
pad lock" (page 6) are available in
Walky-Talky mode.
u
To open the menu, press the display
key ©.

Deactivating Walky-Talky mode

Press the display key.
§OFF§
Using a handset in Walky-Talky
mode as a room monitor
This function allows you to use the Walky-
Talky mode as a room monitor. The room
monitor will then call all handsets that are
in Walky-Talky mode as soon as the previ-
ously set noise level has been reached.
During the call, all keys are locked except
the end call key. The room monitor
function remains active after you end the
call. It must be activated again if the hand-
set has been switched off.
18
Note:
– You should always check the operation
of the room monitor before use. Always
check e.g. the sensitivity and phone line.
– The active room monitor function consider-
ably reduces the operating time of the
handset. Place the handset in the charging
cradle if necessary. This ensures that the
battery does not discharge.
– The handset should be positioned 1 to
2 meters away from the baby. The micro-
phone must be directed towards the baby.
– Please note that the Walky-Talky function's
room monitor does not provide optimum
security.
Activating/deactivating the
room monitor
©
Press the display key.
Room Monitor
Select and press
Room M.:
Select to activate. Select
On
tivate.
Level:
Set the sensitivity for the desired noise
level (Low or High).
¤
Save changes.
The room monitor has now been acti-
vated/deactivated.
Handset settings
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Shortcuts for functions
and numbers
You can assign the left display key and the
digit keys Q and 2 to O with a
number or a function each.
The number is then dialled or the function
started by simply pressing a key.
.
§OK§
to deac-
Off