Extending A Call; Using The Switchover Button - Siemens 300 H Operating Instructions Manual

Calling several persons simultaneously
Step by Step
Consultation?
Start transfer?
Switchover
30 30 30 30

Extending a call

If the person you are conversing with wishes to be for-
warded to one of your colleagues, you can pass on the
connection to this third person.
Extending the call with prior announcement:
Confirm.
S
Call the other party and inform him that the waiting user
wishes to be put through to him.
W
Replace the handset. The two users are connected to
each other.
Extending the call without prior announcement:
Select and confirm.
S
Enter the number of the wanted party.
W
Replace the handset.
If a connection is not set up between the other
two parties within 40 seconds, you are recalled.
You are then connected to the first party again.

Using the switchover button

The switchover button that must be configured by Sys-
tem Support can be used for the following functions:
• consultation (return to the call being held or the con-
ference being held)
• toggling
• accepting a waiting call
• accepting a group call
Waiting call
You hear a call-waiting tone. Information about the call
appears in the display.
Press the flashing key to accept the waiting call. The
lamp is on.
Toggling
You are connected to two users. One user is waiting.
The switchover lamp is on