Siemens 300 H Operating Instructions Manual page 63

Step by Step
PIN 1?
S
Enter the code!
Speaker
Variable call forw.?
Save?
Using a different telephone in the same way as your own
Select and confirm.
If you have several PINs and wish to use another one,
select the other PIN.
With the display "Enter station no." or "Enter ID", you are
requested to enter the PIN.
Entering the PIN for your own HiPath 4000 or Hicom
300 E/H system area:
S
Enter internal PIN.
or Entering the PIN for another HiPath 4000 or Hicom
300 E/H system area within the integrated network:
Enter the 2-digit node code for your own HiPath 4000 or
Hicom 300 E/H system (enquire with System Support).
SU
Enter your own number and press the square key.
SU
Enter the network-wide PIN and press the square key.
Dialling after (successful) identification:
You hear dial tone. The following appears on the display:
"Please dial".
Press the key. The lamp goes out.
S
or Enter a number immediately.
Call forwarding - follow me after successful
identification
Select and confirm.
Confirm. Call forwarding has been activated.
63 63 63 63