About These Operating Instructions; How To Use These Operating Instructions - Siemens 300 H Operating Instructions Manual

About these Operating Instructions

These Operating Instructions describe the use of the optiset E standard, optiset E ad-
vance, optiset E advance plus und optiset E advance conference telephones in conjunction
with the HiPath 4000 Communication Server, Version 1.0 and Hicom 300 E/300 H, all Ver-
sions.

How to use these Operating Instructions

Step by Step
Service Menu
Speaker
Executive
Consultation?
Ringer pitch?
Displays
Callback?
Please dial?
2 2 2 2
The operating procedures are presented in a
logical sequence in the "coloured" column. The
symbols used have the following meanings:
Q
Lift the handset.
W
Replace the handset.
S
Enter number or code.
Press the setting keys on the telephone.
or
Press the key.
Press the key which is lit.
Press the key which is flashing.
The selection option is shown on the display.
Confirm with key
Look for the selection option.
Press keys
appears on the display.
Then confirm with key
Line 1 contains instructions or acknowledgement
messages, depending on the particular situation.
>
Line 2 contains selection options for functions,
which you can confirm by means of
character ">" is visible on the right-hand side, there
are further selection options, which can then be
accessed using
.
until the selection option
.
.
. If the