Siemens Unix V4.0 Overviews & Installation Instructions page 94

Installing Advanced Server for UNIX
The /var installation path is used for the asxtoolsD package.
Default response file for the asxtoolsD package:
NEXUS='/var/opt/lanman/shares/astools.deu'
The /var installation path is used for the msclients package.
Default response file for the msclients package:
MSCLIENT='/var/opt/lanman/shares/msclient'
4.11 Deinstalling Advanced Server for UNIX V4.0
Deinstall the software in the following sequence:
begin with the optional packages (including AS/X Service Packs from the field support)
then the server
followed by NetBIOS.
4.11.1 Deinstalling optional packages
To deinstall the <Package> package, carry out the following steps:
1. Log on as system administrator root.
2. Enter pkgrm <Package>.
Ê
Ê
4.11.2 Deinstalling the server
Work through the following steps:
1. Log on as system administrator root
2. Stop the server using the asx stop command
Product Manual
Confirm with
RETURN
Repeat the pkgrm <Package> command for all optional packages installed.
. The software of the package is now deleted.
Installing optional packages
U7613-J-Z815-6-76