Siemens Unix V4.0 Overviews & Installation Instructions page 323

Lanman.ini File
[lmxserver] Section Parameters
Parameter
lptmpdir
mapaclblob
mapchangelogblob
maplsablob
mapregistryblob
mapsamblob
maxfilesize
maxspoolfds
Product Manual
Description, Values, and Default Setting
The location of the spooling directory for temporary
files used by the UNIX system's LP subsystem.
Default: /var/spool/lp/tmp/uname where uname is the
server's UNIX system name.
Configures whether to use memory-mapped file opera-
tions when accessing the Advanced Server Access
Control List database.
Values: yes, no; default: yes
Configures whether to use memory-mapped file opera-
tions when accessing the Advanced Server Change
Log database.
Values: yes, no; default: no
Configures whether to use memory-mapped file opera-
tions when accessing the Advanced Server Local
Security Authority database.
Values: yes, no; default: no
Configures whether to use memory-mapped file opera-
tions when accessing the Advanced Server Registry
database.
Values: yes, no; default: no
Configures whether to use memory-mapped file opera-
tions when accessing the Advanced Server Security
Accounts Manager database.
Values: yes, no; default: no
The maximum file size, in KBytes, that the UNIX
system redirector will allow a "local UNIX user" to
create on a local system.
Values: 100 - unlimited; default: 100000
This parameter is only evaluated if the lmxspooler
parameter is set to "SPOOLV4". It specifies the number
of file descriptors in the lower range that are to be
reserved for calls to Spool/Xprint. The parameter is set
optimally for the current Spool/Xprint versions and may
only be changed by Technical Support.
Default: 4
Parameters
(continued)
U7613-J-Z815-6-76