Siemens Unix V4.0 Overviews & Installation Instructions page 281

Advanced Server Registry
13.5 Advanced Server Key Descriptions
The Advanced Server subkey of the Advanced Server Registry contains the following
subkeys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AdvancedServer
The following sections describe the entries contained within those subkeys.
13.5.1 Alert Parameters Entries
The Registry path that contains entries for the Advanced Server Alerter service is as
follows:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
AlertAdminOnLicenseOverflow
Specifies whether the server sends an administrative alert message when the
maximum allowable number of clients is exceeded.
Default: 0 (message will not be sent)
You can change the value of this key using the AS/U Administrator.
AlertUserOnLicenseOverflow
Specifies whether the server sends a message to a client that tried to link but failed
when the maximum allowable number of clients was exceeded.
Default: 0 (message will not be sent)
You can change the value of this key using the AS/U Administrator.
Product Manual
\AlertParameters
\FileServiceParameters
\NetAdminParameters
\Parameters
\ProcessParameters
\RpcParameters
\ShareParameters
\UserServiceParameters
\AdvancedServer\AlertParameters
Advanced Server Key Descriptions
REG_DWORD 0 or 1
REG_DWORD
0 or 1
U7613-J-Z815-6-76