Siemens Unix V4.0 Overviews & Installation Instructions page 52

Installing Advanced Server for UNIX
4.6 Installing from CD-ROM with cdinst
Advanced Server for UNIX is only supplied on CD-ROM. The first steps for installation with
the cdinst program are the same for all packages and are thus described here centrally. The
other installation steps for the individual packages are given at the end of this section.
Carry out the following steps in the specified sequence:
1. Log on as system administrator root and insert the CD into the drive of the system from
which you want to carry out the installation.
You can initiate the installation procedure from the UNIX command prompt.
2. Start the installation program with cdinst. The following dialog box is displayed:
Server:
CD-ROM device name:
Remote pathname/
Local mountpoint:
Fill in the form and then press SAVE.
Ê
Ê
3. Mark the ASX set in the displayed list with the cursor and then press
and
info
pkginfo
README
install
Move the cursor to the item you want and press ENTER to
select it.
Ê
Product Manual
1
Place the cursor on CD-ROM device name and select the device name for the CD-
ROM drive with
F2
input. A general message about the volume is then displayed.
Acknowledge with
(ENTER). The following message is then displayed:
F3
2
- Display Detailed Product Information
- Display Detailed Information on Packages
- Display README Files
- Install Products
Select info to display other information on the Advanced Server for UNIX V4.0
product, e.g. the name of the manufacturer, date of manufacture, version etc.
(CANCEL) returns you to the displayed selection.
F6
Process Multi-Product CD-ROM
local
/dev/ios0/sdisk005s0
/cdrom0
(CHOICES). Then select
(CONTINUE).
F8
Installing from CD-ROM with cdinst
(SAVE) to confirm your
F3
(MARK)
F2
U7613-J-Z815-6-76