Siemens Unix V4.0 Overviews & Installation Instructions page 55

Installing Advanced Server for UNIX
4.7 Installing the prerequisited packages
Install the following before the actual server software:
SIreadmeM package
NetBIOS
i
4.7.1 Installing the SIreadmeM package
Install the SIreadmeM package first. The package contains README files in German and
English. These contain information that became available after this manual went to print.
Install the SIreadmeM with the following steps:
Log on to the system console as system administrator root.
Ê
Carry out the installation procedure as described in the section
Ê
ROM with
Then, under AS/X select the package called SIreadmeM. The system now copies the
Ê
German files from the volume to /opt/readme/asx.D and the English files to
/opt/readme/asx.GB.
i
The README files are always located under this path. The manual page files are
numbered consecutively, e.g. the first file for Advanced Server for UNIX V4.0 is stored in
the path /opt/readme/asx.D/man400. Since the package is a general UNIX package which is
used by different products, the package cannot be removed again.
4.7.2 Installing NetBIOS
!
!
The Advanced Server for UNIX package nbrfc with NetBIOS must be installed first. As, in
certain cases, Advanced Server for UNIX establishes contact with other servers when
installing the server software, NetBIOS must be available in advance.
Product Manual
Please observe the specified installation sequence here.
cdinst".
Please observe the information in these files for the next steps.
To be able to use the WINS Service functionality NetBIOS Version 4.0A00 or later
has to be installed. When installing the AS/X package asxserver a warning will
appear if the correct version is not present.
To be able to be use the DNS-WINS integration functionality that is provided with
Reliant UNIX V5.45, NetBIOS Version 4.0B or later has to be installed.
Installing the prerequisited packages
"Installing from CD-
U7613-J-Z815-6-76