Table of Contents
Advertisement
Lanman.ini File
14.2 Parameters
The following sections describe the configurable parameters in the lanman.ini file. The
parameters are grouped according to the section of the lanman.ini file in which they reside.
i
[server] Section Parameters
Parameter
listenname
maxclients
ProductType
srvservices
Product Manual
The lanman.ini file contains additional parameters that are not included in the
following tables. These parameters are for debugging purposes and should never
be modified.
Description, Values, and Default Setting
This is the server's name on the network.
To change the value of the listenname parameter, use
the setservername command. For more information
about this command, type man setservername at the
Advanced Server command prompt.
Values: any servername of 1-15 characters
default: null
Identifies the maximum number of simultaneous client
sessions that the server must support. This number is
set by default to 250. It can be increased to a number
that is equal to the Advanced Server user licence.
Specifies the type of installed Advanced Server for
UNIX. Possible values are ServerNT and LanmanNT.
This parameter is set to the correct value automatically
when Advanced Server for UNIX is configured and
must not be changed.
Default: LanmanNT
The list of keywords for the services that start automat-
ically when the server is started. Because services are
started in the order they appear in the srvservices entry,
you must ensure that netlogon appears before any
services that require it.
Default: alerter, netlogon, browser
Parameters
U7613-J-Z815-6-76
Advertisement
Table of Contents
Troubleshooting
