WOBBLE BIRD OPERATION (Alternate Single Axis Motion)
(For Left and Right motion only-continued)
c. Using the provided 8mm hex key, remove M10 Shoulder Bolt (6) with Bolt Cup, Small (10) as shown. Ensure
M12 Washer (13) remains in position between Wobble Bird Sub-Assembly (1) and linkage. Workhorse trap
users, ensure Large Washer (9) between the Workhorse trap chassis and the Wobble Bird Sub-Assembly (1)
stays in position.
10
6
1
Note: The throwing arm path indicator has been removed from this image for greater clarity.
18