Assembly of WheelyBird Trap onto Wobble Bird Base
with Trap Taxi (not included)
NOTE: Not all hardware provided with the Wobble Bird Base is used when attaching a WheelyBird trap.
1. Before installing a trap on the Wobble Bird Base, safely conduct a safe release on the trap and then safely remove
the mainspring. Refer to your trap's manual regarding the proper procedure for safe release and removal of
mainspring. If you are no longer in possession of the trap manual, do not continue assembly or use of the unit
and contact Champion customer service at (800) 379-1732 or look for a link to the manual on the web page for
your trap at: www.championtarget.com.
2. The following hardware configuration (below) shall be used when installing a WHEELYBIRD TRAP onto
the Wobble Bird Base. Installation steps are shown in detail on the following pages. If you will be installing a
WORKHORSE, see page 6 for proper hardware assembly.
7
14
6
11
16
12
13
12
16
13
13
14
7
6
10