Specifications; Product Overview; Operation - Champion CHBV110 User Manual

Specifications

Item number:
Dimension:
Fabric:
Power supply:
EN
Heat output:
Switch level:
Automatic switch-off:

Product overview

1. Electric blanket
2. Mains cable
3. Operating indicator
4. Switch 0-1-2-3

Operation

1. Connect the power plug to the power socket.
2. Switch on the product.
Before first time use
Inspect the product for completeness and damages. Should the delivery contents be incomplete or
damaged, contact your sales outlet immediately.
Heat settings
0 = off
1 = low heat level
2 = medium heat level
3 =high heat level
• It takes approximately 15 minutes for the bed warmer to reach the desired temperature.
Remember that a temperature that feels warm on the hand may be extremely hot on other
parts of the body.
• You may notice a faint odor the first time the blanket is heated. This odor is completely harm-
less but be sure to air the room after the blanket has been heated for the first time.
• Begin by heating the bed warmer to the highest heat level. After 15 minutes the temperature
can be set to the desired level.
• The bed warmers heating function shuts off automatically after about 3 hours. If you wish to
reheat the product after about 3 hours, simply set the heat level back to 0 for approximately 5
seconds. You can then select the desired heat level once again.
3
CHBV110
150x80 CM
100% Polyester
220-240V~ 50Hz
approx. 60W
0-1-2-3
after approx. 180min
1
2
3
4