Wobble Bird Operation (Alternate Single Axis Motion: Left/Right Only) - Champion WOBBLE BIRD Owner's Instruction Manual

WOBBLE BIRD OPERATION (Alternate Single Axis Motion)
WARNING: Before making any adjustments, make sure the throwing arm is in the uncocked position,
the on/off/safe release switch is in the "off" position, the mainspring is disconnected, and the battery
is disconnected from the trap. Do not manually force the throwing arm through the uncocked
position as the main spring will take over and fire the trap, potentially causing serious injury or
death. Make sure the Wobble Bird Base is turned off and disconnected from power.
• Do not maneuver, transport, conduct repairs or maintenance on the Wobble Bird Base while it is connected
to power.
• Conduct a safe release on the trap by following the instructions in the trap manual and disconnect from
power before making any adjustments to the trap or Wobble Bird Base.
Your Wobble Bird Base was shipped with the linkage positioned to provide both Left/Right motion and Up/Down
motion simultaneously ("Dual Axis" operation). The following instructions provide the procedure to limit motion to
only the Left/Right axis or only the Up/Down axis ("Single Axis" operation).
1. For Left and Right motion only:
a. Remove the two hitch pins from the vertical motion linkage as shown.
b. Remove the two washers, linkage, and two bushings. Retain these items for future use.
Note: The throwing arm path indicator has been removed from this image for greater clarity.
17