DSC PowerSeries Neo HS2TCHP Installation Instructions Manual page 7

Valid Entries
01 6 Beeps
02 Bing-Bing tone
03 Ding-Dong tone
04 Alarm tone (4 second duration)
05 Zone name
[991] Reset Keypad Programming to Factory Defaults
1.
Press [*][8][Installer Code].
2.
Enter [991].
3.
Use the [<][>] keys to scroll to the applicable keypad.
4.
Press [*] to select the keypad.
5.
Re-enter [Installer Code].
6.
Press [*] to reset the selected keypad to factory defaults.