Alarm Function; Setting The Alarm - Sonoro LOUNGE SO-320 Operating Manual

Fig.24. Setting the brightness
3. Turn the click wheel within 4 seconds to set the brightness of the light (level 00 to
32, Fig. 24).
If the device is turned off, you can wait longer.
4. Press the [Light] button again to switch the light off.
If the device is turned off, you can turn the click wheel directly to switch the light on
and set the brightness.
9.

Alarm function

You can use the device to wake up with FM/DAB radio, CD, Relax Music or alarm
ringtones. The alarm functions can also be set in the device's Standby mode.
The alarm setup menu is structured as follows:
"Set the Alarm Time W Set the Alarm Source W Set the Alarm Volume
W Set the Alarm Repetition W End"
If you do not press any buttons for approx. 10 seconds when setting the alarm, the
setting is terminated without saving it.
9.1 Setting the alarm time
Fig.25. Setting Alarm 1
1. Keep the [Alarm 1] or [Alarm 2] button pressed.
W The display shows the [Set Alarm 1] (Fig.25) or [Set Alarm 2] menu.
2. Turn the click wheel to set the hours.
3. Press the click wheel to confirm the entry.
W The minute display flashes.
© sonoro audio GmbH 2018
GB
77