Technical Specifications Of The Module - Siemens SIMATIC NET CP 243-2 Manual

1.3

Technical Specifications of the Module

The technical specifications of the CP 243-2 module are as follows:
Table 1-1
Feature
AS-i cycle time
Configuration of the AS-Interface
AS-i master profiles supported
Attachment to the AS-i cable
Address range
Power supply SIMATIC backplane bus
Current consumption from 5 V DC
Power supply from the AS-i cable
Current consumption from the AS-i cable
Power consumption
Ambient conditions
Operating temperature
Transport and storage temperature
Relative humidity
Construction
Type of protection
Module format
Dimensions (W x H x D) in mm
Weight
SIMATIC NET CP 243-2 AS-i Master
C79000-G8976-C142/02
Technical Description and Installation Instructions
Explanation/Values
5 ms with 31 slaves
10 ms with 62 AS-i slaves using the extended
addressing mode
By a button on the front panel or using the total
configuration command (refer to the description of
the AS-i commands)
M1e
Via an S7-200 terminal block
Permitted current loading from terminal 1 to 3 or
from terminal 2 to 4 maximum 3 A
One digital module with 8DI/8DO and one analog
module with 8AI/8AO
5 V DC
max. 220 mA
According to the AS-i specification
max. 100 mA
3.7 W
Horizontal installation: 0 to C
Vertical installation: 0 to 45 C
–40 C to +70 C
max. 95% at +25 C
IP 20
S7-200 expansion module
71 x 80 x 62
approx. 250 g
1-5