Assigning Ip Addresses Automatically; Windows Xp - Gigaset 108 Owner's Manual

Assigning IP addresses automatically

Your Gigaset WLAN Repeater 108 has a DHCP server that automatically assigns
addresses in the network. As a rule, you do not have to do anything, as the Obtain an
IP address automatically function field is set during the installation of TCP/IP. If, how-
ever, you integrate your Gigaset WLAN Repeater 108 in an existing network with static
address blocks, domain names or subnets or if you cannot launch the configuration pro-
gram straight away, you should check the TCP/IP properties and make any necessary
changes. This is described below.

Windows XP

ì
Click on Start and select Control panel.
ì
Select Network and Internet Connections, then click on the Network Connec-
tions icon.
ì
Double-click on the LAN connection with which you are connected to the Gigaset
WLAN Repeater 108.
ì
Click on Properties.
ì
Select Internet protocol (TCP/IP) and once again click on Properties.
Appendix
93