Gigaset 108 Owner's Manual page 72

Administration
Please note:
Do not switch off your Gigaset WLAN Repeater 108, your PC or the local network
during the updating procedure.
After successful updating, the device is automatically restarted. All the LEDs will go out.
The WLAN LED flashes when the device is restarting (see page 10). When the procedure
is complete, the browser shows the configuration program login screen.
This may take a few minutes.
Please note:
You can check whether the upgrade process was in fact successful in the Status menu
on the start screen (see page 72). Here you should see the latest firmware version for
the Gigaset WLAN Repeater 108.
70