Windows 98 Se/Me - Gigaset 108 Owner's Manual

Appendix

Windows 98 SE/ME

To set a static IP address for your PC:
ì
Start network configuration. To do this, select Start – Settings – Control Panel –
Network.
ì
In the Network window on the Configuration tab, select the TCP/IP option for your
network card. Make sure you select the right TCP/IP entry if there are several in the
selection list.
ì
Click on Properties.
ì
Click on the IP address tab and select the option Set IP address.
ì
Enter the IP address for the PC in the IP address field. Please bear in mind the infor-
mation on page 100.
ì
Enter the subnet mask in the Subnet Mask field.
104