Table of Contents
Advertisement
WPA and WPA2 with authentication server (Access point Operating mode only)
In large networks (e.g. in companies) WPA enables the use of an additional authentica-
tion service. In this case, user access is controlled by user accounts and passwords, in
addition to WPA encryption. A RADIUS server acts as an authentication server. You can
select the new standard WPA2, if this is supported by all components in your wireless
network, or select WPA2 / WPA, if you are using devices that only support WPA.
ì
Select the required option in the Security field.
ì
Enter the IP address of the RADIUS server in the RADIUS server IP address field.
ì
Enter the port of the RADIUS server in the RADIUS server port field.
ì
In the RADIUS server secret key field, enter a key conforming to the conventions of
the RADIUS server, which is to be used by the server for authentication.
ì
Click on OK to apply the settings.
Configuring the Advanced Settings
57
Advertisement
Table of Contents
