Table of Contents
Advertisement
Windows XP
To set a static IP address for a PC:
ì
Click on Start – Control Panel, select Network and Internet Connections and then
click on the Network Connections icon.
ì
Double-click the LAN connection with which you are connected to the Gigaset WLAN
Repeater 108.
ì
On the General tab, click on Properties.
ì
Select Internet protocol (TCP/IP) and click on Properties.
ì
Activate the option Use following IP address.
ì
Enter the IP address for the PC in the IP address field. Please bear in mind the infor-
mation on page 100.
ì
Enter the subnet mask in the Subnet mask field.
ì
Enter the IP address of the access point or the router in the Default gateway field
(not the address of the Gigaset WLAN Repeater 108).
ì
Activate the option Use the following DNS server addresses.
ì
Enter the IP address of the access point or the router in the Preferred DNS server
field (not the address of the Gigaset WLAN Repeater 108).
ì
Click on OK or Close to close each window.
ì
Restart your network (see page 106).
Appendix
101
Advertisement
Table of Contents
