Restoring The Back-Up; Resetting To The Factory Settings; Reboot - Gigaset 108 Owner's Manual

Administration

Restoring the back-up

ì
For Task, select the option Restore configuration.
ì
In your file system, select the backup file with which you wish to restore the config-
uration.
A window will appear prompting you to confirm the procedure.
ì
Click on OK. The configuration will now be updated.

Resetting to the factory settings

You can reset the Gigaset WLAN Repeater 108 to the factory settings. You should do
this before making the device available to others or exchanging it through the dealer.
ì
Select the option Reset configuration to factory default settings and click on OK.
A window will appear prompting you to confirm the procedure.
.
Please note:
You can restart your Gigaset WLAN Repeater 108 if it is not working properly. It should
then be ready for use again (see page 11).
Please bear in mind that when the device is fully reset, all configuration settings will
return to the factory settings. This means that you will have to completely reconfigure
the Gigaset WLAN Repeater 108. This does not affect firmware loaded at an earlier
stage.

Reboot

You can restart your Gigaset WLAN Repeater 108 if it is not working properly. It should
then be ready for use again.
In the Administration menu, select Reboot.
Click on OK to restart the device.
68