Appendix; Settings For Wireless Connection For Games Consoles; And Set-Top Boxes - Gigaset 108 Owner's Manual

Appendix

Appendix
This appendix contains information about:
u
Basic settings for wireless connection of two games consoles (see below)
u
Configuring the network (see page 82)
u
Updating IP addresses (see page 107)
u
Troubleshooting (see page 111)
u
Specifications (see page 116)
u
Approval (see page 117)
u
Customer Care (see page 119)

Settings for wireless connection for games consoles

and set-top boxes

The following example describes what settings you need to make if you want to wire-
lessly connect two games consoles using two Gigaset WLAN Repeater 108 devices.
The configuration description always refers to the factory settings of the
Gigaset WLAN Repeater 108.
Configuring the first Gigaset WLAN Repeater 108 (as an access point)
ì
Start up the user interface of the Gigaset WLAN Repeater 108 from the PC
(see page 16) and select Basic Setup Wizard.
ì
Select Access point as Operating Mode.
ì
On the wireless network settings screen, select the Channel and enter the required
SSID.
In Super G mode (see page 54), however, the channel is set automatically.
ì
On the local network settings screen, select the following options:
– IP address type: Static
– DHCP Server: On
ì
On the Security Setup Wizard close-down screen, deactivate the option to start the
Basic Setup Wizard and click Finish.
80