Sunny Health & Fitness Obsidian Surge 500 User Manual page 7

4
66
3
71
67
35
# 66 M8*15 4pcs
# 67 M6*10 2pcs
#71 OD20*ID8.5*1.5 4pcs
# 75 S13-17
# 68 M4*12 2pcs
# 75 S13-17
2
68
26
#60 M8*15
#71 OD20*ID8.5*1.5 8pcs
#74 S5
1
71
60
71
60
ASSEMBLY INSTRUCTIONS
STEP 1:
66
NOTE: We recommend having 2 people to
assemble the product.
71
Turn over the Slide Rail (No. 3) and Seat (No.
36) as left.
36
Slide the Seat (No. 36) onto the Slide Rail (No.
3). Secure the Stopper (No. 35) with 2 Flat
Cross Screws (No. 67). Then attach the Rear
Stabilizer (No. 4) to the Slide Rail (No. 3) with 4
Washers (No. 71) and 4 Outer Hex Screws (No.
66). Tighten with Spanner (No. 75).
STEP 2:
68
Attach L & R End Caps (No. 25 & 26) to Front
Stabilizer (No. 2). Then tighten with 2 Cross
25
Screws (No. 68) using Spanner (No. 75).
STEP 3:
8pcs
Keep the Main Frame (No. 1) upright. Attach
Front Stabilizer (No. 2) to Main Frame (No. 1)
using 8 Washers (No. 71) and 8 Screws (No. 60).
Tighten with Allen Wrench (No. 74).
71
60
60
71
Note: You can put 3~4 screws into the holes first,
and start tighten by hand. After all the screws are
put in, then tighten with the tool.
2
7