Baofeng DM-1701 User Manual page 7

[*]button
[#]button
■ Programmable Buttons
In order to improve the operational convenience, the function shortcut keys provided by this product are 【SK1】 key, 【SK2】 key,
【SK3】 key, 【P1】 key and 【P2】 key. For the specific function, please consult the distributor. For the detailed description of each
function, please refer to the corresponding contents of "Function and Operation".
No. Shortcut name
1 None
2 All prompt tone
on/off
3 Emergency mode
on
4 Emergency mode
off
5 Select high/low
power
6 Monitor
7
Push to talk 1
8 Relay / offline
9 Scan on / off
10 Strict/normal
squelch
11 Encryption on/off
12 Voice control on/off
13 Area switching
14
Battery power
indication
15 Individual
operation switch
16 Recording switch
17 Record playback
18 Delete all the
recordings
19 1750Hz
20 Up and down
screen switch
21 Left key
22 Right key
Note:
●The same button short press and long press can achieve different functions, specific by the dealer settings.
2. Security and overview
Press and hold this button to lock on / off keyboard
Code word * in DTMF function
Switch the input method in input method interface.
Code word # in DTMF function
No function is assigned to the preset button.
Quickly enable or disable all prompt tones at the same time.
Quickly establish an emergency call. This is the recommended option for the orange button.
Quickly end an emergency call initiated outward.
Quickly switch between high power and low power.
Quickly turn on or off the monitor function.
Quickly make digital group calls, digital single call, call prompts, or send text messages (only for digital mode) via
push to talk. (This option is only available if the digital function is enabled on the device.) Push-to-talk 1 to
push-to-talk 6 can be set.
Quickly switch between relay mode and offline mode.
Quickly turn the scan function on or off. Note: double-segment double-waiting scan does not work
Quickly switch between strict squelch and normal squelch (only for analog mode).
Quickly turn on/off encryption for channel (only for digital mode).
Quickly turn on or off the voice control function.
Quickly select the area, allowing the user to switch between two areas.
Quickly access to battery power. The user can check the battery status by LED. The battery power is sufficient if
the LED is constantly in green, the battery power is still available if the LED is constantly in yellow, and the battery
power is low if the LED is in red.
Quickly turn on or off individual operation function.
(Based on firmware) to quickly turn on/off the recording
(Based on firmware) to quickly playback of recordings
(Based on firmware) to quickly delete all recordings
Fast launch 1750 pilot signal
Quickly switch the upper and lower screen
Purpose