Menu Item Explanation; 4.6.2 Sensorprom; Device Variables; Dynamic Variables - Siemens FDK:085U0321 Operating Instructions Manual

HART add-on module
4.6.1 Menu item
explanation

4.6.2 SENSORPROM

5.

Device Variables

6.

Dynamic Variables

6.1

MAG 5000 C/6000

6.2

MASS 6000

10
4. Product interfaces / 5. Device Variables / 6. Dynamic Variables
The table below describes submenus under the main menu „HART module".
Item Value
HART 0-15
short address
TAG name 8 characters
TAG descriptor 16 characters
TAG date 3 bytes
HART x.xx
SW version
All of the transmitter HART settings are stored in the SENSORPROM. This means that if the HART
module is exchanged for another HART module, all of the relevant HART settings are kept.
This Field Device does not expose any Device Variables.
The dynamic variables are fixed and can not be mapped to other than the specified PV, SV, TV
and QV.
PV
SV
T V
QV
PV
SV
T V
QV
Description
Device address [Factory setting: 00]
Can be used to TAG the device.
Can be used to describe the TAG.
Can be used to date the installation.
Firmware version of the HART module.
M e a n i n g
Volume flow
Totalizer 1
Totalizer 2 / Batch
Not implemented
Meaning
Mass flow
Density
Temperature
Volume flow
Units
See Table: units
See Table: units
See Table: units
Units
See Table: units
See Table: units
See Table: units
See Table: units