!
2D Maintenance Safety
Before servicing the conveyor, always disengage power and ensure all moving parts
•
have stopped.
Support the machine with blocks or stands when working underneath the conveyor.
•
Keep service area dry and clean. Be sure electrical tools are properly grounded. Use
•
adequate light for the job at hand and use personal protective equipment.
Use only tools, jacks, and hoists of sufficient capacity for the job.
•
Replace all shields before operating. Check that all fittings are tight.
•
2E Grain Storage Safety
Never enter a grain bin unless at least two people are present. Have one person
•
outside the bin solely to shut the conveyor down in case of emergency.
Always ensure an escape route exists before entering the bin.
•
Only walk on top of grain bin if equipped with safety line and another person is
•
present.
Do not place intake of conveyor near or between your feet when standing on top of
•
grain. There is a risk of being pulled into the grain pile causing suffocation.
Figure 3: Workplace Hazard Area (Gas Engine Drive)
!
_
_
! 1 0