Inserting The Batteries - Siemens optipoint 200 User Manual

Gigaset 200, GBR, A31008-G200-B101-1-7619
Use only the plug-in power supply unit
!
provided, as indicated on the bottom of
the base unit.
Important: new phone cable. Use only the
enclosed cable type.
If you purchase another cable, ensure that it
has the correct connector pin assignment.
Step 2: Put the handset into operation
The display is protected by a plastic foil.
Please remove the protective foil.

Inserting the batteries

Insert the batteries with the correct polarity – see
figure.
Put the lower end of the battery compartment cover
in position (see arrow), and press against the
_ribbing at the top until it engages.
To open it, lift the cover by the ribbing.
Use only approved, rechargeable batter-
!
ies of the same type. Otherwise you risk
damaging your health and the product.
Do not use charging units belonging to
other devices because they could damage
the batteries.
VORBEREI.FM 28.09.01
7