Repeater Support; Restoring The Base Default Settings - Siemens Gigaset C340 User Manual

Changing the system PIN
You can change the base's 4-digit default
system PIN ("0000") to a 4-digit PIN known
only to yourself.
Caution:
Thoroughly memorise the new system PIN! If
you forget it the phone will require expert
intervention. If this happens, contact the Sie-
mens Hotline (page 35).
¢ ¢
Settings
§Menu§
~
Enter the current system PIN
and press
~
Enter your new system PIN
and press
PIN is shown as four stars
( **** ).
~
Now re-enter the new system
PIN and press
a
Long press (idle status).

Repeater support

You can use a repeater to boost the range
and reception of your base station. Before
you can use it you must activate the
repeater mode. This will terminate any
calls that are in progress at the time.
Requirement: A repeater must be regis-
tered.
¢ ¢
Settings
§Menu§
¢
Features Repeater Mode
Press the control key to con-
§OK§
firm.
When repeater mode is active, the menu
option is marked by a ‰.
Restoring the base default
settings
Restoring the base default settings does
not de-register the handsets. The follow-
ing settings are not affected:
u
System PIN
u
SMS info services
¢
Base System PIN
.
§OK§
. For security the
§OK§
.
§OK§
¢
Base Additional
You will find a list of the default settings in
the Appendix, page 37.
Resetting the base with the menu
¢ ¢
Settings
§Menu§
~
Enter the system PIN and
press
§OK§
Press the control key to con-
§OK§
firm.
Base station settings
¢
Base Base Reset
.
31