Activating/Deactivating Handsets - Siemens Gigaset 3000 Operating Instructions Manual

Preparing the handset

Activating/deactivating handsets

Note:
The language set at the factory is English. For informa-
tion on changing the language to German or another lan-
guage, refer to page 52.
Off status: Display blank – calls cannot be received.
On status e.g.
telephone functions: normal operating status.
Activating the handset:
* Activated by default.
Deactivating the handset:
Note:
The handset can only be fully switched off when it is
removed from the charging shell!
The handset is automatically set to on or message status
if it is placed in the charging shell, see page 17.
is displayed. Prerequisite for all
Press the on-hook key and hold it
down for one second. You will hear the
confirmation beep.
Display when the handset is on or in
message status, see page 17.
Press the on-hook key and hold it
down until the display is blank. You will
hear the confirmation beep.
15
*