Logging handsets onto a telephone system
e.g. ... Enter the system PIN (max. 8 digits).
To ensure that the handset/telephone used to "open"
the logon window can be used again immediately:
Base/system: For Hicom cordless E, the handsets are
not logged on at the stations (base stations) but at the
telephone system. In this case, Base on the display
always refers to the DECT system.
The "ISDN Config" function should always be activated
as a basic setting.
DECT = Digital Enhanced Cordless Telecommunications
Open the submenu.
Press the display key to confirm selec-
An input prompt appears.
Confirm the entry with the display key.
If logon has been successful,
is displayed, with intermediate display
of the ring symbol
and enter the code no. digits, e.g. #24.