Table of Contents
Advertisement
SYMBOLS
Battery
T
Double Insulated
B
Alternating Current
F
Direct Current
Application around and
,
removal from hazardous live
conductors is permitted
Do not dispose of this product
=
as unsorted municipal waste
)
Canadian Standards Association (NRTL/C)
Safety Information
• The ACD-20SW, ACD-21SW and ACD-21SWC swivel Clamp meters conform
to EN61010-1:2001; EN61010- 2-032:2002; CAT III 600 V, class II; pollution
deg.2 and EN61326-1 (EMC compliance)
• This instrument is EN61010-1 certified for Installation Category III (600V).
It is recommended for use in primary supply lines, overhead lines and
cable systems and distribution level and fixed installations, as well as lesser
installations.
• Do not exceed the maximum overload limits per function (see
specifications) nor the limits marked on the instrument itself. Never apply
more than 600 V ac rms between the test lead and earth ground.
Warnings and Precautions
W
• Before and after hazardous voltage measurements, test the voltage
function on a known source such as line voltage to determine proper
meter functioning.
• Disconnect the test leads from the test points before changing meter
functions.
• Disconnected from the meter's test leads before measuring current.
W
Refer to the manual
J
Earth Ground
I
Fuse
P
Complies with EU directives
Conform to relevant
;
Australian standards
m
Audible tone
2
Advertisement
Table of Contents
