Cable Retainer; Preparing Eggs; Boiling All Eggs To The Same Firmness - Silvercrest SED 400 A1 Operating Instructions Manual

Cable retainer

There is a cable retainer
you to adjust the length of the cable to your requirements.
CAUTION – PROPERTY DAMAGE!
► Ensure that you always guide the cable through the corresponding gap in
the rear of the appliance base
NOTE
► Always wrap the power cable around the cable retainer
direction. This reduces the length of the cable to a minimum, allowing you
to guide the cable through the gap in the appliance base

Preparing eggs

1) Pick a hole in the bottom of the egg with the egg pick
inside the egg to dissipate as it expands during boiling. It prevents the shell
from bursting open.
2) Place up to 7 eggs on the cooking insert
3) Fill the measuring cup
water into the cooking bowl
4) Place the cooking insert
Boiling all eggs to the same firmness
NOTE
► The preprogrammed cooking times relate to average-sized eggs (size M/L)
at a temperature of around 7°C (refrigerator temperature).
1) Turn the control switch
firmness (see the symbols to the right of the control):
Symbol
■ 8
│ GB│IE│NI│CY
on the base of the appliance. This retainer allows
for the sake of stability.
up to the MAX marking with tap water and tip this
.
into the cooking bowl
to the position that corresponds to the desired egg
Meaning
soft-boiled eggs
medium-boiled eggs
hard-boiled eggs
in a clockwise
.
. This allows the air
with the picked side up.
and place the lid
SED 400 A1
on top.