Spray Gun And High-Pressure Hose - Unimac UM-S1P User Manual

UM-S1P Electric High-Pressure Airless Paint Station
7. Squeeze the trigger to cycle the cleaning liquid
through the system. Repeat steps 3 to 5 until the
liquid running through the return hose is clear.
9. Loosen the hose clamp at the filter end of the inlet hose.
10. Pull the filter from of hose and rinse thoroughly in appropriate cleaner.
11. Push the filter back into the hose.
12. Secure the filter using the hose clamp.

Spray Gun and High-Pressure Hose

1. Disconnect the spray gun from the high-pressure
hose.
3. Pull the bottom of the trigger guard from the
spray gun handle.
5. Rinse all elements of spray gun to remove any remaining traces of paint.
6. Reassemble spray tip and guard. Then follow this procedure in reverse to reassemble spray gun.
7. Coil the high-pressure hose after cleaning and for storage to prevent damage.
E&OE
8. Once complete, perform the
procedure.
2. Remove the spray tip, then unscrew the mixing
nozzle.
4. Unscrew the handle from the spray gun, then
remove the filter from the top of the handle.
Clean the filter thoroughly.
©2018 Unimac
pressure release
17