Set-Up - Unimac UM-S1P User Manual

UM-S1P Electric High-Pressure Airless Paint Station

Set-Up

The machine automatically regulates pressure – when the set pressure is reached, the motor shuts off.
When the pressure drops, the motor starts again until the correct pressure is reached and so on.
Pressure
1. Rotate the pressure valve as required until a
medium to high pressure shows on the pressure
gauge.
Stroke Speed
1. Spray a test patch or scrap material and assess
the speed of stroke required for the pressure
and coating material. Generally, lower
pressures will require slower strokes, and higher
pressures, faster strokes.
Aligning the Spray Nozzle
1. Perform the pressure release
preferred spray pattern (vertical (up-down), or horizontal (sideways (left-right)).
E&OE
2. Test spray some scrap material, and adjust
procedure. Then rotate the mixing nozzle to match the direction of
Horizontal
©2018 Unimac
pressure until a smooth and even spray
consistency is achieved
Vertical
13