Assembly - Unimac UM-S1P User Manual

UM-S1P Electric High-Pressure Airless Paint Station

Assembly

1. Lower the machine body into the frame, with the front
of the machine toward the lower side of the frame.
3. Connect the adaptor to the outlet port. Firmly tighten
the connecting nut using a 19mm spanner.
5. Connect the high-pressure hose to the adaptor outlet
connector. Firmly tighten the connecting nut using a
19mm spanner.
E&OE
2. Secure the machine to the frame with the four M6
bolts, spring washers and washers. Firmly tighten the
fasteners using the Allen key.
4. Connect the pressure gauge to the adaptor "T"
connector (middle connector), then firmly tighten by
hand.
6. Connect the other end of the high-pressure hose to
spray gun connector. Firmly tighten the connecting nut
using a 19mm spanner.
©2018 Unimac 10