Related Manuals for Unimac UM-SP-35
Summary of Contents for Unimac UM-SP-35
- Page 1 It is recommended to print this page, laminate it and attach it to the machine for easy reference...
- Page 2 User manual Unimac Airless Paint Sprayer UM-SP-35 WARNING! Read and understand all safety warnings and instructions carefully before using this machine. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save this manual for future reference.
-
Page 3: Table Of Contents
Product Manual – Airless Spray Painter Table of Contents Safety ................................2 Parts Diagram .............................. 6 Assembly..............................7 The pump unit ....................................7 The spray gun ....................................7 Before use ..............................8 Using your Airless Paint Sprayer ........................8 Using the spray gun ..................................9 Adjusting the pressure .................................. -
Page 4: Safety
Product Manual – Airless Spray Painter Safety Only qualified persons should install, operate, maintain, and repair this unit. ATTENTION! This manual is provided to assist the owner of the product to understand the functions it provides and how to prepare the equipment. This manual does not seek to teach the user how to perform the actual task it is used for. - Page 5 Use a when flammable fumes present. protection recommended keep standard liquid car wash or similar Ground equipment and conductive objects hazardous vapours and liquids out of eyes. detergent. Always wear a face mask when spraying. 150914120800 UNIMAC Airless Paint Sprayer...
- Page 6 Acceptable Oil Grade: 80W-90, SAE 90 or 85W-90 WARNING! Do not use the appliance if important Gear Oil only. parts of the appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun. 150914120800 UNIMAC Airless Paint Sprayer...
- Page 7 / handling of this machine, or are in any way unsure of any part of this products suitability or correct use for your application you should complete training conducted by a person or organisation qualified in safe use and training related to this product. 150914120800 UNIMAC Airless Paint Sprayer...
- Page 8 Unimac Airless Paint Sprayer UM-SP-35 Parts Identification ATTENTION! Products covered by this manual may vary in appearance, assembly, inclusions, description and packaging. Inlet filter Inlet hose Outlet hose Manual Prime valve Pressure gauge Spray Gun Spray / Prime valve Pressure valve Spray tip 10.
-
Page 9: Assembly
Unimac Airless Paint Sprayer UM-SP-35 Assembly Pump Unit Video Tutorial: Assembly and Setup 1. Attach carry handle; a. Remove both bolts on the “handle bar” and set aside. b. Insert handle into the air prayer frame. 2. Using the bolts from (a) bolt the handle to the frame firmly using a spanner. -
Page 10: Before Use
Unimac Airless Paint Sprayer UM-SP-35 Before use IMPORTANT! Test your airless sprayer for WARNING! Never test spray on the actual leaks before every use. work piece, always use an item that can be discarded . 1. Place the “prime / spray selector” in the Prime setting. -
Page 11: Using The Spray Gun
Unimac Airless Paint Sprayer UM-SP-35 Using the Spray Gun 1. During paint spraying, hold the gun upright to the surface of paint-object and keep a constant spraying distance of 350 to 400mm (A). 2. S t a r t m oving the spray gun before pulling the spray trigger and maintain gun movement during spraying. -
Page 12: Pressure Relief Procedure
Unimac Airless Paint Sprayer UM-SP-35 Adjusting Spray Pressure NOTE! Operating the sprayer at higher pressure than needed, wastes material, causes early tip wear and shortens sprayer life. 1. Turn the “Pressure Control Knob” Clockwise to increase pressure and counter-clockwise to decrease pressure. -
Page 13: Maintenance
Unimac Airless Paint Sprayer UM-SP-35 Maintenance NOTE: ALWAYS clean the machine after spraying to avoid any residual spray material in the machine, spray gun and spray tip from hardening and causing blockages, or otherwise affecting performance of the machine. • Always clean the machine using the correct type of solvent or thinner for the material that has been sprayed. - Page 14 Unimac Airless Paint Sprayer UM-SP-35 1. Ensure the machine is on a flat and level surface. 2. Remove the 10 M6 bolts securing the pump cover. 3. Fill with oil until the surface of the oil is 20mm from the top most lip of the reservoir.
-
Page 15: Troubleshooting
Unimac Airless Paint Sprayer UM-SP-35 Troubleshooting This guide should be followed in case of failure of the appliance to operate correctly. If symptoms persist contact our Customer Service Team on (02) 8667 7874. WARNING! DO NOT ATTEMPT TO REPAIR OR MODIFY THE APPLIANCE... -
Page 16: Specifications
Specifications Input Voltage: 220-240V / 50Hz Maximum Pressure: 275 Bar / 4000PSI Motor: 3.5HP / 2600W Delivery: 2.1 to 3.8 l/minute dependent on paint viscosity Coverage: Approximately 7 to 8m per litre. Hose Length: 25M 150914120800 UNIMAC Airless Paint Sprayer... - Page 17 Some experts believe that the incorrect or prolonged use of almost any product may cause serious injury or death. To help reduce your risk of serious injury or death, refer to the information below. For more information, see www.datastreamserver.com/safety ...