Spraying Procedure - Unimac UM-S1P User Manual

UM-S1P Electric High-Pressure Airless Paint Station

Spraying Procedure

2. Keep the spray gun approximately 30cm (12")
from the surface to be sprayed. Maintain this
distance.
4. Begin 15cm (6") off the edge of the area being sprayed. Start the movement of the stroke before
squeezing the trigger.
5. Release the trigger once past the opposite edge of the area being sprayed.
E&OE
Switch the machine on. Release the spray trigger
3.
lock.
Rotate the spray tip to the "spray" setting (arrow
pointing forward).
©2018 Unimac 14