Making A Phone Call; Dialling With Number Keys; End Call; Set Volume - Siemens MT50 User Manual

Dialling with number
keys
The phone must be switched on
(standby mode).
J
Enter the number (always
with prefix, if necessary
with the international
dialling code).
§Clear§
the last digit, a long press
clears the entire number.
W
Press the Call key. The
phone number displayed
is dialled.

End call

Press the End key briefly.
S
Call is ended. Press this
key even if the person on
the other end of the line
has hung up first.

Set volume

MN
You can adjust the hand-
set volume with the scroll
keys (only during the
call).
If a Car Kit is used, its volume setting
does not affect the usual setting on
the phone.

Making a phone call

A short press clears

Redial previous numbers

To redial the phone number last
called:
W
Press the Call key twice.
To redial other numbers that were
dialled previously:
W
Press the Call key once.
MN
Pick out the required
phone number from the
list, then press ...
W
... to dial.
Note
? Store number............................p. 19
Call lists.............................p. 17
§Options§
§Hold§.................................................p. 15
; menu§
Call menu ..........................p. 16
§Divert§ Divert set ..............................p. 73
International dialling codes............... p. 75
Auto key lock .....................................p. 61
Phone number memo........................p. 76
Microphone off ..................................p. 16
Phone number transmission off/on
(Hide ID)............................................p. 67
Control codes (DTMF).......................p. 73
13