Download  Print this page

Clear Sim Card Barring; Making A Phone Call - Siemens A65 User Manual

Hide thumbs


right page (9)
of A65_PUMA en, A31008-H5810-A1-1-7619 (22.07.2004, 13:32)
Change phonecode
You define the phone code (4 to 8 digits)
when calling up a phone-code protected
function for the first time. It is then valid
for all phone-code protected functions.
Following the third unsuccessful attempt,
access to the phone code and the func-
tions that use it is denied. In such an in-
stance contact Siemens Service (p. 28).

Clear SIM card barring

If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN), provided by your serv-
ice provider with the SIM card, according
to instructions. If the PUK (MASTER PIN)
has been lost, please contact your service
Preventing accidental activation
Even if PIN entry is deactivated (p. 8) con-
firmation is required to switch on phone.
This prevents accidental activation of the
phone, e.g. when you are carrying it in
a bag or when you are travelling in an
After long press of the On/Off/End key
to switch on the phone or abort the
operation with

Making a phone call

Dialling with number keys
The phone must be switched on (standby
mode). Dial number (always with area
code, if necessary with international dial-
ling code). To dial International dialling
codes press and hold
played. Press
until a "+"-is dis-
and select country.
Making a phone call
Short press
to clear the last digit, a
long press clears the entire phone
number. To dial press the
End call
Press the End key
key even if the person on the other end of
the line has hung up first.
Set volume
Use the control key
the volume during conversation. Set vol-
ume with
and confirm with
If a Car Kit is used, its volume setting will
not affect the usual setting on the phone.
Redial previous numbers
For redialling previously dialled numbers
press the Call key
once, pick out the
required phone number from the list
, then press
If number busy
for automatically dialling
§Auto dial§
the phone number ten times at increas-
ing time intervalls or press
for phone ringing when the busy number
is free. Press
and a beep will re-
mind you to redial the dispayed phone
number after 15 minutes.
Accept call
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone. Press
Please make sure you have accepted the call
before holding the phone to your ear. This will
prevent a loud ring tone from damaging your
briefly. Press this
to start adjusting
§Call back§


Table of Contents

   Also See for Siemens A65

   Related Manuals for Siemens A65

Comments to this Manuals

Symbols: 0
Latest comments: