4.12.1 Parameters Service Level - Siemens RDG400 Basic Documentation

Name
Service level
P01 Control sequence
P02 User operating mode profile (mode button)
P04 Selection of °C or °F
P05 Sensor calibration (intern, extern)
P06 Standard temperature display
P07 Display info line
(2nd line of LCD)
P08 Comfort setpoint
P09 Minimum setpoint in Comfort mode
P10 Maximum setpoint in Comfort mode
P11 Energy Saving heating setpoint
P12 Energy Saving cooling setpoint
P14 Button lock function
Note
Siemens
Building Technologies

4.12.1 Parameters Service level

Factory setting
When 2-pipe /
2-stage:
1 = Cooling only
When 4-pipe:
4 = H and C
1
0 (°C)
0 K
0
0
21 °C
5 °C
35 °C
15 °C
30 °C
0
Parameter display depends on selected application and function
RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation
Functions
Range
0 = Heating only
1 = Cooling only
2 = H/C changeover manual
3 = H/C changeover auto
4 = Heating and Cooling
1 = (Auto) - Comfort - Protection
2 = (Auto) - Comfort - E Saving - Prot
0 = Degrees Celsius (°C)
1 = Degrees Fahrenheit (°F)
– 3 ... 3 K
0 = Room Temperature
1 = Setpoint
0 = --- (No display)
1 = °C and °F
5 ... 40 °C
5 ... 40 °C
5 ... 40 °C
OFF, 5 ... WcoolE-saving;
(WcoolE-saving = 40 °C max)
OFF, WHeatE-saving ... 40 °C;
(WHeatE-saving = 5 °C min)
0 = Unlocked
1 = Auto locked
2 = Manual locked
0..1
29 / 42
CE1P3182en
28 May 2009