4.12.1 Parameters Of The "Service Level - Siemens RDG400 Basic Documentation

Name
Service level
P01 Control sequence
P02 Operating mode profile (operating mode button)
P04 Selection of °C or °F
P05 Sensor calibration (internally, externally)
P06 Standard temperature display
P07 Display info line
(2nd line of LCD)
P08 Comfort setpoint
P09 Min. setpoint for Comfort mode
P10 Max. setpoint for Comfort mode
P11 Energy Saving heating setpoint
P12 Energy Saving cooling setpoint
P14 Button lock function
Note:
30 / 42
Siemens
Building Technologies

4.12.1 Parameters of the "Service level"

Factory setting
1 = Cooling only
1
0 (°C)
0 K
0
0
21 °C
5 °C
35 °C
15 °C
30 °C
0
• Parameter display depends on selected application and function
• P01 is available for "Single-duct" and "Single duct & heating / cooling coil" only
RDG400 Basic Documentation
Functions
Range
0 = heating only
1 = cooling only
2 = H/C changeover manually
3 = H/C changeover automatically
1 = Comfort - Protection
2 = Comfort - E-saving - Protection
0 = degrees Celsius (°C)
1 = degrees Fahrenheit (°F)
– 3...3 K
0 = room temperature
1 = setpoint
0 = --- (no display)
1 = °C and °F
5...40 °C
5...40 °C
5...40 °C
OFF, 5 ... WcoolE-saving;
(WcoolE-saving = 40 °C max.)
OFF, WHeatE-saving ... 40 °C;
(WHeatE-saving = 5 °C min.)
0 = unlocked
1 = auto locked
2 = manual locked
0..1
CE1P3182en
19 Jun 2009