Freewing MIG-21 FISHBED User Manual page 5

PNP Assembly Instructions
3.Use 4 screws to secure the main wing.
4.Use the steel wire to pull the left and right wing connection wires to the battery compartment.
5.Use plastic cover to close the main wing connection cable
trough on the inner wall.
Elevator and Rudder Installation
Elevator Installation
1. Place the elevator onto the tail of the fuselage
2. Use 2 screws to secure the elevator
3. Repeat the above steps to install the other
elevator.
MIG-21MF FISHBED
Item No.:FJ210
Screws
(PM3x6 4pcs)
6.Use glue and screw to secure the intake plate.
A-Tail fuselage
B- Screws
(KA2.6x8 4pcs)
A
B
Main wing servos wire
Landing gear wire
Screw
(FA3x8mm)
4