Siemens SIPART PS2 6DR50xx Manual page 91

1 Display
2 Operation mode key
3 Decrement key
4 Increment key
Figure 4-2 Display and input keys of the positioner
.
Firmware version
Figure 4-3 Firmware version, example: 4.00.00
SIPART PS2 Manual
A5E00074631--06
1
2 3
Explanations of the input keys.
The operation mode key (manual key) serves to switch over the op-
S
erating mode and pass on parameters.
NOTE
By pressing and holding the operation mode key and additionally
pressing the decrement key, you can select the parameters in reverse
order.
The decrement key
S
uration and to move the actuator in manual operation.
The increment key
S
uration and to move the actuator in manual operation.
The current firmware state is displayed when you exit the configuration
menu.
4
serves to select parameter values in config-
serves to select parameter values in config-
Operation
91