GE Druck DPI612 series Safety And Quick Start Manual page 11

Safety and Quick Start Guide
5.1 Functions
To change the measure and source functions swipe from right to left on the
calibrator application screen. Select CALIBRATOR in the TASK menu to choose
from a library of pre-configured TASKs appropriate for common tests. For
example:
Select
power.
To save a TASK in FAVOURITES select the check box
To create a custom TASK select CUSTOM TASK and manually configure the required
measure and source functions. CUSTOM TASK tasks can be saved for future use by
adding them to FAVOURITES using the Save function
5.2 Set Date, Time and Language
To access Date, Time and Language menus
Select:
5.3 Themes
Two themes are available: Dark and Light; select the correct theme for the
light level.
Select:
DASHBOARD >>
5.4 Druck DPI612 Manual
Select the Help icon on the Dashboard to access the manual. All the
information required to operate the Druck DPI612 is in the Help section of the
Dashboard which is accessed by selecting:
DASHBOARD >>
Page 11 of 20
to test a pressure transmitter and provide 24 V loop
DASHBOARD >> SETTINGS >> DATE
SETTINGS >> THEME
HELP
[EN] English – 109M0089
Druck DPI612
followed by
in the TASK MENU.
.