Advertisement
All manuals and user guides at all-guides.com
Windows 95 SR2
Requirements
• HP Vectra with Windows 95SR2 installed.
• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2
• Driver Name for Vectra VL8: W95SETUP.INF Size: 8K Date: 10/18/96
• Driver Name for Vectra VE7/VE8: OEMSETUP.INF Size: 65K Date: 08/05/
97.
• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and
NWLink NetBIOS transfer protocols.
Device Configuration
Card State
Interrupt
I/O Address
Procedure
1 With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card
into a PCI slot.
2 Boot the machine to Windows 95, and the Token-Ring card will
automatically be recognized. Click on "Next."
3 When prompted, click on "Other Locations."
4 Insert drivers CD, set the path to "D:\WIN95\" (Where "D" is the drive
letter assigned to your CD-ROM) and click "OK."
(If you have an HP preloaded HDD, set the path to "C:\MASTERS\LAN
\TRPCI.WOL\WIN95\")
5 Click on "OK" to continue the installation.
6 Verify that "IBM PCI Token-Ring Adapter, NDIS2/3" is listed and click on
"Finish."
7 Click "OK" to provide your Computer and Workgroup names.
8 Enter your Computer Name, Workgroup Name, Computer Description,
and click on "Close."
Vectra VL8
Vectra VE7/VE8
-
Enabled
11
10(5)
C800-h
DC00-h
1 Connecting to a Netware 3.12 Server
Windows 95 SR2
Advertisement
