Advertisement
All manuals and user guides at all-guides.com
1 Connecting to a Netware 3.12 Server
Windows for
Requirements
Workgroups
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.
• Driver Name: IBMTRPO.LAN Size: 65KB Date: 7/26/96
• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and
NWLink NetBIOS transfer protocols.
Device Configuration
Interrupt
I/O Address
Card State
Procedure
1 Boot the Vectra to a DOS prompt, and insert the IBM Token-Ring 16/4 PCI
adapter and drivers CD ver 1.
2 VE7/VE8: From the "IBMTRPCI\LANAID\" directory on your CD-ROM
type "LANAIDC/VIEW" to verify the deice configuration settings. VL8 and
VE7/VE8: From the "IBMWOL\IBMTRPCI\LANAID\" directory on your
CD-ROM run "LANAID.EXE."
3 Hit enter for "Software Installation" and verify the following options:
4 DOS with Windows v3.1x
5 Express Install LAN Client's NetWare Client & 802.2
6 Hit enter to continue, and at the "Express Install of IBM LAN Client"
window, hit enter to install.
7 After file copy is complete, remove any diskettes, hit enter four times to
exit, then reboot the computer.
8 After Windows loads, open the "Netware User Applications" window, and
Vectra VL8
Vectra VE7/VE8
11
10(11)
C800-h
DC00h
-
Enabled
1 Connecting to a Netware 3.12 Server
Windows for Workgroups
Advertisement
